Tel:189 6211 7003
E-mail:snow@kleanprotech.com
Medicine
KleanAssure membrane Capsule Filters BioBurden-Reduction Grade
Author: ComeFrom: Date:2026-02-02 20:40:57 Hits:30

KleanAssure  membrane Capsule  Filters BioBurden-Reduction Grade

KleanAssure capsule filters is family of self-contained capsule filters with Staubli connection at the vent, which enables on-line integrity test.
The bio-burden reduction grade filter is constructed of single layer hydrophilic polyethersulfone membrane in all polypropylene construction.
It offers broad chemical compatibility, high flow rate at low pressure drop, and low extractables.
The polyethersulfone is particular suitable for the filtration of products that contains substances absorb to the membrane itself. The low protein binding characteristics of polyethersulfone makes it a good choice for the filtration of valuable protein solutions such as vaccines.


Typical Application:
Cell Culture Media
Large Volume Parenterals (LVP's)
Pharmaceutical Bulk Chemical Solutions
Diagnostics
Blood and Serum Fractions
Purified Water
Beer, Wine and Spirits
Juice & Soft Drinks
Bottled Water


Food Safety Compliance:
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR.
Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU Directives 10/2011.


Capsule Integrity
Minimum burst pressure: 123.5psi (8.5barg)


Construction Materials
Filter Media: Polyethersulfone
Media Support: Polypropylene
End Caps: Polypropylene
Inner Core: Polypropylene
Outer Cage: Polypropylene


Toxity: 
All components meet the specifications for biological safety per USP Class VI-121℃ for plastics.


Integrity 

Pore SizeMinimun Bubble Point  
0.04µm31.9PSI(2.2barg),IPA
0.1µm24.7PSI(1.7barg),IPA
0.2µm51PSI(3.5barg)
0.45µm35PSI(2.4barg)
0.65µm22PSI(1.5barg)

Ordering Information:  

KABRCSPore sizeLengthInletOutletVentDrainB=Filling Bell
 0×4=0.04μm
001=0.1μm
002=0.2μm
004=0.45μm
006=0.65μm
H=1.5"
S=2.5"
D=4"
L=5"
1T=1"TC
MT=0.5"TC
M6H=3/8"multistep hose barb
1T=1"TC
MT=0.5"TC
7H=1/2"hose barb
8NF=1/2"NPT-F
M6H=3/8"multiple
hose barb
S=Staubli
H=Hose Barb
S=Staubli
H=Hose Barb
 

  • Subject:
  • UserName:
  • Tel:
  • Email:
  • Content:
  • Code:
  •