Tel:189 6211 7003
E-mail:snow@kleanprotech.com
Medicine
KleanAssure PES membrane Capsule Filters General Application
Author: ComeFrom: Date:2026-02-02 20:56:19 Hits:22

KleanAssure PES membrane Capsule  Filters General Application


KleanAssure capsule filter is family of self-contained filters with Staubli connection at the vent, which enables on-line integrity test.
The filters are constructed of single layer hydrophilic polyethersulfone membrane in all polypropylene construction.
It offers broad chemical compatibility, high flow rate at low pressure drop, and low extractables.
The polyethersulfone is particular suitable for the filtration of products that contains substances absorb to the membrane itself. The low protein binding characteristics of polyethersulfone makes it a good choice for the filtration of valuable protein solutions such as vaccines and biologicals.


Typical Application:
Cell Culture Media
Large Volume Parenterals (LVP's)
Pharmaceutical Bulk Chemical Solutions
Diagnostics
Blood and Serum Fractions
Purified Water
Beer, Wine and Spirits
Juice & Soft Drinks
Bottled Water


Toxity: 
All components meet the specifications for biological safety per USP Class VI-121℃ for plastics.


Food Safety Compliance:
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR.
Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU Directives 10/2011.


Construction Materials
Filter Media: Polyethersulfone
Media Support: Polypropylene
End Caps: Polypropylene
Inner Core: Polypropylene
Outer Cage: Polypropylene


Capsule Integrity
Minimum burst pressure: 
123.5psi (8.5barg)


Integrity 

Pore SizeMinimun Bubble Point 
0.05μm31.9 psig (2.2bar), IPA
0.1μm24.7 psig (1.5bar), IPA
0.2μm45 psig (3.1 bar) 
0.45μm24 psig (1.7 bar) 
0.65μm19 psig (1.3 bar) 
0.8μm17 psig (1.2 bar) 
1.2μm11.6 psig (0.8 bar) 

 Ordering Information:

KAGACSPore sizeLength InletOutletVentDrainB=Filling Bell
 0×4=0.04μm
001=0.1μm
002=0.2μm
004=0.45μm
006=0.65μm
008=0.8μm
012=1.2μm
H=1.5"
S=2.5"
D=4"
L=5"
1T=1"TC
MT=0.5"TC
M6H=3/8"multistep hose barb
1T=1"TC
MT=0.5"TC
7H=1/2"hose barb
8NF=1/2"NPT-F
M6H=3/8"multiple
hose barb
S=Staubli
H=Hose Barb
S=Staubli
H=Hose Barb
 


  • Subject:
  • UserName:
  • Tel:
  • Email:
  • Content:
  • Code:
  •