KleanCap capsule filters is family of full size capsule filters with Staubli connection at the vent, which enables on-line integrity test.
The filters are constructed of single layer hydrophilic polyethersulfone membrane in all polypropylene construction.
It offers broad chemical compatibility, high flow rate at low pressure drop, and low extractables.
The polyethersulfone is particular suitable for the filtration of products that contains substances absorb to the membrane itself. The low protein binding characteristics of polyethersulfone makes it a good choice for the filtration of valuable protein solutions such as vaccines and biologicals.

Typical Application：

Cell Culture Media
Large Volume Parenterals (LVP's)
Pharmaceutical Bulk Chemical Solutions
Diagnostics
Blood and Serum Fractions
Purified Water
Beer, Wine and Spirits
Juice & Soft Drinks
Bottled Water

Filter Area:  0.6m^2/10"

Capsule Integrity
Minimum burst pressure: 
123.5psi (8.5barg)

Food Safety Compliance：

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR.
Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU Directives 10/2011.

Construction Materials
Filter Media: Polyethersulfone Double Layer
Media Support: Polypropylene
End Caps: Polypropylene
Inner Core: Polypropylene
Outer Cage: Polypropylene

Toxity： 

All components meet the specifications for biological safety per USP Class VI-121℃ for plastics.

Integrity 

Pore size	Minimun Bubble Point
0.2/0.2µm	55.1 PSI 3.8barg（water）
0.45-0.2µm	55.1 PSI 3.8barg（water）
0.8-0.45µm	39.2/2.7barg（water）

Ordering Information: 

KCSTTS	Pore size	Length	Fittings	Vent	Drain
	00x1=0.04/0.1µm 00x2=0.04/0.2µm 00x4=0.04/0.45µm 0014=0.1/0.45µm 0022=0.2//0.2µm 0024=0.2//0.45µm 0026=0.2/0.65µm 0028=0.2/0.8µm 0046=0.45/0.65µm 0048=0.45/0.8µm	03=2.5" 05=5" 10=10" 20=20" 30=30" 40=40"	1HT=1.5"TC	H=Hose Barb	H=Hose Barb